BeltedGirls.com

another solution that I used on my Chinese rear wire belt was to place tap washers around the 2 pins between the shields, the lower padlock I removed and replaced with a spare pin from an old belt. This raises the secondary shield up nicely.

Hi there, I did order one of their belts a while back, while the fit was good, I found that the rivets rusted and the front lock screw protruded behind the belt onto the skin when locked which also rusted and caused skin irritation. I also discovered that when the detachable rear was removed, the be...

A shot of the back of the belt.

hi, yes, I still have this belt.

Hiya, thought I'd share my experiences here, maybe of help.. Work on getting the waistband fitting snug first. Is it a curve or straight waistband? Vaseline is good as the sides will need it from time to time to prevent blisters, etc. You may find after some hours you'll need to move the skin a litt...

I have a spare one I don't use ever as it had a slight burr on it and surplus to requirements. I ended up with 3 Chinese plugs from various belt purchases, you're welcome to it but I'm probably the wrong side of the pond for you for it to be cost-effectively posted. I really wish these Chinese manuf...

Hiya, I'm good thanks. I have recently been modifying my Spices belt, the recent ergonomic banded Chinese belt that I bought at the end of last year that was far too large on the waistband shares some common parts with my current belt, so I swapped out the front plate, removed the lower padlock hold...

Yes, actually quite a romantic tale with that belt actually, I remember sending the key to my partner at the time in the States, being in it for quite long periods of up to a month, hehe.. The waistband on that belt was a poor fit though and I tried altering the shape of the band into a more ergonom...

Hiya, the USA belt is not fixed into a T position at the front like a lot of belts are, this one pivots on it's holding front bolt, it's on it's tightest setting in the photo, the other 2 holes that the lock bolt can be locked through are further to the left of where it is currently fixed on that en...

Yeah, my measurements were wrong from the start on that Tollyboy belt, so it was ill fitting to begin with, plus my body shape changed. It was a bit of a learning curve for me with that being my first belt.. I had a look at it earlier, I noted the rubber lining peeling away from the front plate and ...