BeltedGirls.com

I would like to buy a metal chistity belt where the waistband is locked at her back. With a wire between the buttocks and the front plate permantent attached both front and rear, it possible to have one lock that hold together the chastity belt.

I see no reason why the lock is at her stomach. Probably just because it has traditionally been in front. With a proper taking measurements and the opportunity to adjust a little, would the belt be perfect, even if she went up or down in weight.

The advantages of a lock in the back are great.
Flatter front of the belt and she can hardly pick the lock, if she not see it.

Now I just have to convince a manufacturer.

Tobbe wrote:därfram

I think we should say something like "in front" instead so that our English members are not confused.

Tobbe wrote:Flatter front of the belt and she can hardly pick the lock, if she not see it.

But would it not leave a bump on her back instead? That seems much harder to hide than a bump in front.

I think you two men have a great idea.

What about a lock like the one on my chinese chastity belt? The blocking pin lock is an excellent choice, and I know firsthand that even if you pick the cylinder, you still cannot extract the tensioned pin withou the key acting as an extraction wrench.

You get a belt made like that and I'll product test it for ya.

Pyra Gorgon wrote:I think you two men have a great idea.

What about a lock like the one on my chinese chastity belt? )

A good idea Pyra. This lock is narrow and easily hidden under clothing. Even difficult to open without a key. When I get your measurements?

A good idea Pyra. This lock is narrow and easily hidden under clothing. Even difficult to open without a key. When I get your measurements?

Just as soon as I get your email!!!

How you want those measurements? Metric or English?

Pyra Gorgon wrote: How you want those measurements? Metric or English?

Are there other countries beside US using English?

Pyra Gorgon wrote:

How you want those measurements? Metric or English?

Metric!

Metric!

Send me email, you'll have my measurements in metric, Tobbe.

@Pyra!
Message sent, you have a few days of work to get it right.
You must measure carefully and repeatedly.

Tobbe wrote:@Pyra!
Message sent, you have a few days of work to get it right.
You must measure carefully and repeatedly.

Tobbe, measurements sent.
I used a old Neosteel chastity belt measuring kit to take measurements off of bottom edge of the nylon & velcro waistband.

I can re-verify measurements in 2 days, then again in 5 days. Then you will have 3 sets of measurements to account for weight variances and tolerances. Take the average of each measurement over a week of measuring.

Will that be accurate enough? If not, please provide me additonal instructions of what you desire me to do.