chastity belt locks
Posted: 03 Feb 2014, 16:42
chastity belt locks
Chastity belts(CB) vary greatly from simple to complex systems. The simplest is using a staple and hasp with a some sort of padlock. Most are using some sort of post with a modified padlock with addition hardware to either lock cylinder that is modified to custom built locks. The security of the locks themselves vary depending on quality and design of the components.
I will try and keep this within reason but keep in mind I am holding back a bit on how deep I could go as it would not be productive. My background is mechanical engineering with heavy emphasis on design. I am also a master locksmith who has specialized in the odd ball locks out there. I collect, document,and repair handcuffs and the like. Also working on some of my own lock designs as I have time.
People will vary greatly on just how secure or difficult a lock is to defeat. For most people a low level of security will work just fine as most people know little how the locks really work or to pick them, manipulate them open. Then there are those at the other extreme where they want one that is not only difficult to pick open but resist a certain amount of attack with tools.
Tollyboy uses a round key lock which is called a radial lock system as opposed to axial like they typical padlock and house key. The reason Tollyboy locks are deemed high security is because they used a Ace radial lock or better, better meaning they had anti pick pins in them. Another reason is that it was difficult to get keys made for these locks in the UK. Tollyboy is using the 7 pin version of the radial lock and the average padlock uses 4 pins and the house lock uses 5 pins typically. Tollyboy machined a shell that fit over a threaded locking post with pins on the side so the shell fit into it and would not rotate. The lock cylinder which was fastened into the shell, is placed onto the posts and the key rotated to draw the shell in tight against the belt until snug enough and able to remove the key.
Here is a link to see the lock, http://www.tpe.com/~altarboy/not91018.htm
Neosteel uses a disc lock that is custom made entirely. This lock just pushes on over a locking post and clicks into place. You have a key that is 2 sharp round posts that go into the holes on the lock to release the mechanism inside and pull off. Very simple to operate and of reasonable security, but can be defeated with some ingenuity.
Here is a link to see the lock, http://www.neosteel.de/Nsepsnap.htm
Chinese system(s) which was adapted from a company called Martins cuffs that makes restraints using a lock made by Burg of Germany. The lock itself is a specialty lock that was designed to block the key way of the old ward/lever locks that was used widely in Europe. Small and compact lock with an unusual type key works by inserting it into the hole on the side and turning it to lock it and remove the key. In the links, you will also see the other type and how it works.
http://www.dhresource.com/albu_237928989_00/1.0x0.jpg
http://image.dhgate.com/albu_246110486_ ... -model.jpg
http://img02.taobaocdn.com/bao/uploaded ... 10x310.jpg
http://image.dhgate.com/albu_246543923_ ... stable.jpg
As I have time I will add more stuff but this ought to be a good start.
Chastity belts(CB) vary greatly from simple to complex systems. The simplest is using a staple and hasp with a some sort of padlock. Most are using some sort of post with a modified padlock with addition hardware to either lock cylinder that is modified to custom built locks. The security of the locks themselves vary depending on quality and design of the components.
I will try and keep this within reason but keep in mind I am holding back a bit on how deep I could go as it would not be productive. My background is mechanical engineering with heavy emphasis on design. I am also a master locksmith who has specialized in the odd ball locks out there. I collect, document,and repair handcuffs and the like. Also working on some of my own lock designs as I have time.
People will vary greatly on just how secure or difficult a lock is to defeat. For most people a low level of security will work just fine as most people know little how the locks really work or to pick them, manipulate them open. Then there are those at the other extreme where they want one that is not only difficult to pick open but resist a certain amount of attack with tools.
Tollyboy uses a round key lock which is called a radial lock system as opposed to axial like they typical padlock and house key. The reason Tollyboy locks are deemed high security is because they used a Ace radial lock or better, better meaning they had anti pick pins in them. Another reason is that it was difficult to get keys made for these locks in the UK. Tollyboy is using the 7 pin version of the radial lock and the average padlock uses 4 pins and the house lock uses 5 pins typically. Tollyboy machined a shell that fit over a threaded locking post with pins on the side so the shell fit into it and would not rotate. The lock cylinder which was fastened into the shell, is placed onto the posts and the key rotated to draw the shell in tight against the belt until snug enough and able to remove the key.
Here is a link to see the lock, http://www.tpe.com/~altarboy/not91018.htm
Neosteel uses a disc lock that is custom made entirely. This lock just pushes on over a locking post and clicks into place. You have a key that is 2 sharp round posts that go into the holes on the lock to release the mechanism inside and pull off. Very simple to operate and of reasonable security, but can be defeated with some ingenuity.
Here is a link to see the lock, http://www.neosteel.de/Nsepsnap.htm
Chinese system(s) which was adapted from a company called Martins cuffs that makes restraints using a lock made by Burg of Germany. The lock itself is a specialty lock that was designed to block the key way of the old ward/lever locks that was used widely in Europe. Small and compact lock with an unusual type key works by inserting it into the hole on the side and turning it to lock it and remove the key. In the links, you will also see the other type and how it works.
http://www.dhresource.com/albu_237928989_00/1.0x0.jpg
http://image.dhgate.com/albu_246110486_ ... -model.jpg
http://img02.taobaocdn.com/bao/uploaded ... 10x310.jpg
http://image.dhgate.com/albu_246543923_ ... stable.jpg
As I have time I will add more stuff but this ought to be a good start.