BeltedGirls.com

Hi there... I just got a belt from Access Denied. I'm still playing with it, but first observations:

VERY solid belt. It is NOT coming off.

The fit is taking a little adjusting, but I think it is fitting very well. Maybe a little pinching here and there, but generally not uncomfortable at all and I think lubrication will solve the problems and make it a little easier.

I've seen some mention of people using oils or talc for lubrication. How exactly are people doing that? Any particular oils? Baby powder? What do people suggest?

THANK YOU.

where is it sticking?
2 things I've done recently to alleviate that...I wear a sleeveless tight fitting t-shirt and wear the waist part of the belt over that, also, I fold a soft paper towel and slide it into the crotch between my labia and the metal to avoid pinching my delicate lips...but I only need that when I go out and am unable to do any adjusting.
I would avoid using lube, too much wet on your skin will promote bacteria and fungus, and avoid talc because it eventually bonds with the oils in your skin making little talc balls (feels like sand) and will rub those areas raw.

<3 Luci

I recommend you vegetal oil (I use sweet almond and baby oil).

Wendy wrote:I recommend you vegetal oil (I use sweet almond and baby oil).

What about a water based lube like astroglide? According to the Access Denied website, the lining is silicone.

Thanks.

My Chinese and My-Steel belts have a silicon lining: my oils never damaged them.
I don't own any Access Denied belt.

Wendy wrote:My Chinese and My-Steel belts have a silicon lining: my oils never damaged them.
I don't own any Access Denied belt.

Thanks you for this and the other info you've posted.

So far I'm very happy with the Access Denied belt.

The best way is to strengthen the skin and you not do it with oils and skin lubricants.

Buy some rubbing alcohol and lubricate it where the belt is against your skin.
Then it becomes less fragile and you will have no trouble using your belt 24/7.

Thanks... I've been using a little baby oil on the inside of the front panel, and water based lube on the inside of the belt. Helped a great deal.