BeltedGirls.com

I newer saw this model before.
Does anyone have made any experiences with it?


https://www.ebay.com/itm/Female-Stainle ... 0005.m1851

Have a nice day.
Greetings from Bondemand

Looks like a cheap knockoff of these:

https://fancysteel.com.au/collections/f ... waist-band

https://fancysteel.com.au/collections/f ... stity-belt

Thin wires of metal, they must give a lot of pressure on bones, and they must be easy to break with boltcutters.
I didn't know this model, I never tried it, and I don't think I will.

It looks very similar to the belt I bought, but with a different waistband. I'd try it..

Which belt is that?

https://fancysteel.com.au/collections/f ... stity-belt

this is the one I want eventually...and if they come up with a cheaper model like this I'd totally grab one. I haven't found one in a chinese version though

This belt I have, did a bit of a review on it on here. https://www.aliexpress.com/item/Adjusta ... 0.0.psAziL

Alcina wrote:This belt I have, did a bit of a review on it on here. https://www.aliexpress.com/item/Adjusta ... 0.0.psAziL

that's the belt I just got yesterday. It does seem to be a much better quality than what I expected for sure. I am still trying to get used to the waist panels, they tend to dig a little bit so I had a really bad time trying to sleep in it last night..I am wiped out today as a result. I think I expected them to be bigger or something, they are only 3" long except for the back panel which is 6".
Anyway, I posted about it in my thread a bit.
OH, one thing about it also...the screws are all allenhead screws and they're pretty weak, I stripped a few of them putting it together so those ones are there forever now no matter what. It did come with quite a few extra pieces though so that was good.

<3 Luci

My belt (this model) just arrived and it needs be cut down quite a bit. Anyone had success with cutting it down to size?

@curiousprincess It is a chastity belt with cables and you can cut them to right size.
Then you have to try to take out the wire threads one by one from the connections, if you not have a chance to get new ones. I do not know how this cable ends look like, but sometimes it is possible to use electrical wiring ring eye terminals.

If you must reuse the old ones, then try to make the cable connection like a tube to pull in the cut cable end. Press the cable connection with a pliers, so it not get off.

It is not a hard job to do, if you have the right tools or have someone who can help you to do it.